- Factorial Omega My Dystopian Robot Girlfriend Incontinent Cell body size changes use June’s equipment and module interface.
- Buy size modules before expecting new body-shape controls in the customization screen.
- Open the equipment screen and look for the dedicated module or slider area.
- Adjust one category at a time so you can identify which change affected June’s appearance.
- Save after customizing to protect your setup before testing outfits or interactions.
Factorial Omega My Dystopian Robot Girlfriend Incontinent Cell Body Size Basics
Factorial Omega My Dystopian Robot Girlfriend Incontinent Cell how to change body size instructions center on June’s customization system rather than a general character-creation menu. Body proportions are handled through equipment, modules, and the related adjustment controls. If the options are missing, the most likely issue is that the required module has not been purchased, equipped, or made available in the current save.
The body-size system is designed for targeted customization. Instead of applying one universal body preset, you can work with separate areas such as the chest, hips, thighs, calves, and feet. This makes it easier to create a consistent appearance, but it also means that each category may require its own item or module.
Do not search only through clothing. Body-shape controls are normally grouped with modules or equipment, while outfits and accessories are managed separately.
Modules
Modules provide the functional customization controls used to alter June’s body configuration.
Clothing
Clothing changes her outfit and may affect how proportions appear, but it does not replace body-size controls.
Accessories
Accessories such as glasses, stockings, collars, and skirts change presentation without being body-size settings.
| Customization Area | Main Purpose | What to Check |
|---|---|---|
| Body-size module | Alters a selected body region | Confirm the module is owned and equipped |
| Slider controls | Fine-tunes the selected size | Move gradually and preview the result |
| Clothing tab | Changes outfits | Check whether clothing hides the adjustment |
| Accessories tab | Adds cosmetic items | Treat these as appearance additions, not size controls |
The most reliable approach is to separate acquisition from adjustment. First confirm that the module exists in your inventory. Next equip it through the appropriate module slot. Only then should you look for the slider or size control associated with that body area.
If a new control appears but the model does not change immediately, switch tabs, preview another outfit, or reload the customization screen. Interface refresh issues can make a correctly equipped module appear inactive until the screen updates.
Step-by-Step Body Size Setup
Use the following process when you want to change June’s body proportions without losing track of your current configuration.
Purchase or locate the module first, equip it second, adjust the slider third, and save only after the preview looks correct.
Open June’s Customization Interface
Enter the equipment or customization screen used to manage June’s installed modules and cosmetic items. Look for separate categories rather than searching inside the clothing list.
Locate the Body-Size Module
Find the module connected to the body region you want to change. Common categories include chest, hip, thigh, calf, and foot adjustments. If the category is absent, verify that the corresponding item has been acquired.
Equip the Module
Place the size module into the correct module slot. A purchased item may not affect June until it is actively equipped, so check the active equipment list before changing values.
Adjust the Relevant Slider
Use the available slider or adjustment control to increase or decrease the selected area. Make small changes first, then inspect June from multiple views and with different outfits.
Save and Recheck the Result
Save the current game or customization state after confirming the appearance. Reopen the equipment screen if necessary to ensure the module and selected value remain active.
| Step | Menu or Action | Expected Result |
|---|---|---|
| 1 | Open equipment/customization | June’s installed items become accessible |
| 2 | Select modules | Body-related equipment categories are visible |
| 3 | Equip a size module | The matching adjustment control becomes available |
| 4 | Move the slider | The selected body area changes in the preview |
| 5 | Save the setup | Your configuration is preserved for later scenes |
When testing a change, avoid modifying several areas at once. For example, adjust the chest category, inspect the result, and then move to the thigh or calf category. This method makes it easier to identify whether a visual difference comes from the body module, a clothing layer, or an animation.
Some outfits can obscure small changes. If the result is difficult to judge, temporarily switch to a simpler outfit or use the undressed preview option if it is available in your build. Afterward, restore the preferred clothing configuration.
Which Body Areas Can You Adjust?
The customization system supports several separate body-size categories. Each one affects a different part of June’s silhouette, so the best setting depends on the look you want rather than a single universally optimal value.
A balanced result usually comes from making related adjustments together. If you increase one area significantly, inspect nearby proportions before making another large change.
| Body Category | Visual Focus | Practical Use |
|---|---|---|
| Chest size | Upper torso and bust profile | Adjust the upper-body silhouette |
| Hip or rear size | Lower torso and hip profile | Create a broader or narrower lower-body shape |
| Thigh size | Upper legs | Match the legs to the hip and torso proportions |
| Calf size | Lower legs | Refine the transition from knees to ankles |
| Foot size | Feet and footwear fit | Modify the lower-leg and shoe presentation |
A proportion-focused setup often works better than maximizing every slider. Large differences between adjacent areas may look unusual in certain poses or outfits, while moderate values tend to remain more consistent across scenes.
Consider these planning approaches:
- Balanced profile: Keep chest, hips, thighs, and calves close to one another.
- Upper-body emphasis: Increase chest size while leaving the lower-body settings near their previous values.
- Lower-body emphasis: Adjust hips and thighs together, then review the calves for visual balance.
- Subtle refinement: Make small changes to one or two categories instead of rebuilding the entire appearance.
- Footwear-aware setup: Check shoes and stockings after changing foot or calf size.
Balanced
Keep neighboring body areas within a similar range for a consistent silhouette.
Upper Focus
Prioritize the chest setting, then inspect clothing layers and upper-body animations.
Lower Focus
Pair hip and thigh adjustments before fine-tuning calves and footwear.
Subtle
Use small slider movements when you want June’s default appearance with minor refinements.
The preview should be treated as the final judge. A value that looks good in one outfit may appear different with stockings, skirts, or layered clothing. Always test the appearance using the clothing combinations you expect to use most often.
Troubleshooting Missing or Incorrect Size Changes
If June’s body size does not change, check the setup in a fixed order. Randomly replacing items can make it difficult to determine whether the problem is a missing module, an inactive slot, a visual preview issue, or a save-state problem.
Create or use a separate save slot before experimenting with several modules. This gives you a safer way to restore the previous appearance if the interface behaves unexpectedly.
| Problem | Likely Cause | Recommended Check |
|---|---|---|
| No size option appears | Module is unavailable or not owned | Review the shop, inventory, and unlock requirements |
| Module is owned but inactive | Item is not equipped | Inspect the active module slot |
| Slider moves but model looks unchanged | Preview has not refreshed | Change tabs, switch outfits, or reopen the screen |
| Outfit clips after adjustment | Clothing layer does not match the new proportions | Test another outfit and re-equip the affected clothing |
| Setting disappears after loading | Change was not saved correctly | Save again, then confirm the value after reloading |
Follow this troubleshooting sequence:
- Confirm that the correct body category is selected.
- Check whether the size item is in the inventory.
- Verify that the module is equipped rather than merely purchased.
- Move the slider by a noticeable but moderate amount.
- Change the preview outfit or leave and reopen the menu.
- Save to a separate slot and reload that slot.
- Test the setting in another scene if the preview remains unclear.
If only one body-size category works while others do not, check whether the save or game build recognizes every installed module. Re-equipping the affected item may refresh the connection between the inventory entry and the customization control.
Clipping does not always mean the body module failed. Clothing, hair, accessories, and scene-specific animations can use separate layering rules. Test the body setting without complicated clothing layers before deciding that the module is broken.
Body Size Setup Checklist:
- Open the equipment or customization screen
- Confirm the desired body-size module is owned
- Equip the module in the active slot
- Adjust one body category at a time
- Save and test the result with your preferred outfit
Best Practices for a Stable Customization Save
June’s appearance can involve several independent systems, so organization matters. Keep a simple record of the values you like, especially if you frequently test new modules or outfits. A written note can save time when comparing different looks.
Before making major changes, save a stable version and note the important slider positions. Use that setup as your baseline for future experiments.
A dependable customization routine looks like this:
- Save before changing multiple modules.
- Adjust only one body region during each test.
- Inspect the result in the equipment preview.
- Test the same change with everyday clothing and accessories.
- Reload the save if a value appears to reset.
- Keep cosmetic items separate from functional modules.
- Avoid judging a change from one animation alone.
| Practice | Why It Helps | Suggested Timing |
|---|---|---|
| Baseline save | Preserves a known-good appearance | Before major customization |
| Single-category testing | Identifies the source of each visual change | During every adjustment session |
| Outfit testing | Reveals clipping or layering conflicts | After changing body proportions |
| Menu refresh | Reconnects the preview with current equipment | When a slider appears inactive |
| Final verification | Confirms the saved configuration | Before ending the session |
The best body-size configuration is the one that remains visually consistent across the outfits and scenes you use most. Avoid treating the highest or lowest value as automatically better. Proportion, clothing compatibility, and personal preference are more useful criteria.
Q: How do I change body size in Factorial Omega My Dystopian Robot Girlfriend Incontinent Cell?
Open June’s equipment or customization screen, locate the relevant body-size module, equip it, and adjust the associated slider. Save the result after testing it.
Q: Why can’t I see the body-size slider?
The required module may not be owned or equipped. Check the inventory and active module slots, then reopen the customization interface.
Q: Which body areas can be changed?
The available categories include chest, hip or rear, thigh, calf, and foot adjustments. Each category is handled separately.
Q: Why does clothing look wrong after changing June’s proportions?
Some clothing layers may not display identically with every body setting. Test another outfit, refresh the preview, and re-equip the affected item.